|
Residential User
Professional User
    |
SUPERNATURAL™ 2-STEP PROTECTIVE WOOD FINISH
Supernatural™ is a waterborne clear wood finish containing the highest quality blend of polyurethane ingredients.
Supernatural™ is a waterborne clear wood finish containing the highest quality blend of polyurethane ingredients. Supernatural’s soft sheen resembles a hand rubbed finish and gives any interior or exterior wood surface a completely natural look.
Specs - SUPERNATURAL™ 2-STEP PROTECTIVE WOOD FINISH
| Appearance: | Colour depends on tint used |
| Specific Gravity: | 1.03 |
| Boiling Point: | N/D |
| Freezing Point: | N/D |
| Sizes: | 3.8L/1 USG, 18.9L/5 USG |
| pH: | 8 - 9 |
| VOC Content: | 213 g/L or 0.23 lbs./US Gal. |
| Flash Point: | N/D |
| Viscosity: | N/D |
| Shelf life: | 24 months |
| Coverage: | STEP 1 STEP 2 |
| Smooth wood: | 200 sq.ft. 600 sq.ft |
| Rough wood: | 150 sq.ft. 400 sq.ft |
Features & Benefits
• Water-based formula
• UV protection
• Beads water
• Low odour
• Fast drying
• Unparalleled protection against water
• Heat and chemical resistant
• Easy water clean-up
• Excellent for all exterior or interior woods
• Non-toxic
Available in:
• Clear Tone Base
• Red Cedar
• Natural Cedar
• Clear Light Pine
• UV protection
• Beads water
• Low odour
• Fast drying
• Unparalleled protection against water
• Heat and chemical resistant
• Easy water clean-up
• Excellent for all exterior or interior woods
• Non-toxic
Available in:
• Clear Tone Base
• Red Cedar
• Natural Cedar
• Clear Light Pine
Environmentally Responsible
Advanced Water Based Technology
Product Downloads
Data Sheet
TYPICAL USES
• Log homes
• Hardwood and softwood
• Fine woodwork
• Cabinetry
• Doors and windows
• Hardwood and softwood
• Fine woodwork
• Cabinetry
• Doors and windows
EQUIPMENT AND TOOLS
Natural bristle or synthetic paintbrush, roller or sprayer.
OPTIMUM APPLICATION TEMPERATURE
50 to 80°F (10 to 27°C)
PREPARATION
1) Cover / protect plants and other areas not to be treated with Supernatural™ Protective Wood Finish System.
2) Prepare,clean or strip wood with appropriate BIO-WASH™ product (Stripex™, Stripex™-L, Simple Wash™ or Woodwash™).
3) Stain Prep™ is a pH balancing cleaner that increases coating penetration and maximizes coating life.
Apply Stain Prep™ to neutralise acidic residue in wood, then rinse with plenty of water.
4) Let wood dry for at least two to three hours or until dry-to-touch.
2) Prepare,clean or strip wood with appropriate BIO-WASH™ product (Stripex™, Stripex™-L, Simple Wash™ or Woodwash™).
3) Stain Prep™ is a pH balancing cleaner that increases coating penetration and maximizes coating life.
Apply Stain Prep™ to neutralise acidic residue in wood, then rinse with plenty of water.
4) Let wood dry for at least two to three hours or until dry-to-touch.
TEST PATCH
Apply a small test patch in an inconspicuous area to ensure desired colour and product performance.
APPLICATION
1) Stir Supernatural™ thoroughly prior to use.
DO NOT SHAKE OR AERATE.
2) Do not apply Supernatural™ in direct sunlight.
3)Using a good quality paintbrush, apply the first coat of Supernatural™ on a cool surface above 50°F (10°C). If the air temperature is above 80°F (27°C) do not apply product.
If the wood feels warm to touch, it is too hot to finish.4) About two to four hours after applying the first coat (when first coat is dry to touch or slightly tacky), apply the second coat of Supernatural™.
If spraying or rolling, saturate a small surface at a time and then immediately back-brush using additional Supernatural™.
DO NOT SHAKE OR AERATE.
2) Do not apply Supernatural™ in direct sunlight.
3)Using a good quality paintbrush, apply the first coat of Supernatural™ on a cool surface above 50°F (10°C). If the air temperature is above 80°F (27°C) do not apply product.
If the wood feels warm to touch, it is too hot to finish.4) About two to four hours after applying the first coat (when first coat is dry to touch or slightly tacky), apply the second coat of Supernatural™.
If spraying or rolling, saturate a small surface at a time and then immediately back-brush using additional Supernatural™.
COATING MAINTENANCE
1) Once wood is protected with Supernatural™ use Simple Wash™ for regular cleaning.
2) When rain-water immediately soaks into wood, a maintenance coat of Supernatural™ Step 2 is required.
3) Prepare wood with Stain Prep™.
4) Let wood dry for at least two to three hours or until dry-to-touch.
5) Apply a maintenance coat of Supernatural™ Step 2.
2) When rain-water immediately soaks into wood, a maintenance coat of Supernatural™ Step 2 is required.
3) Prepare wood with Stain Prep™.
4) Let wood dry for at least two to three hours or until dry-to-touch.
5) Apply a maintenance coat of Supernatural™ Step 2.
COVERAGE
For best results use 2 coats of Step 1 and finish with one coat of Step 2.
Step 1 coverage on first coat: 150 to 200 sq.ft./US Gal. (14 to 18.5
sq.m./3.8L).
Step 1 coverage on seond coat: 200 to 300 sq.ft./US Gal. (18.5 to 28
sq.m./3.8L).
Step 1 coverage on first coat: 150 to 200 sq.ft./US Gal. (14 to 18.5
sq.m./3.8L).
Step 1 coverage on seond coat: 200 to 300 sq.ft./US Gal. (18.5 to 28
sq.m./3.8L).
DISPOSAL
Dispose of remaining product in accordance with applicable environmental regulations.
CLEAN UP
Clean up tools immediately with tap water.
PRECAUTIONS
KEEP OUT OF REACH OF CHILDREN.
Keep product from freezing.
Keep product from freezing.
